We like to play it safe and say that your fabrics are ready to use after 8 hours. Dry time does vary due to many variables. To check if your fabrics are ready for use, wipe your finger across the surface; if your finger is abnormally shiny then the product is not finished drying.

This is the time it takes for IntegraTect to permanently bond to the fabrics fiber. Once dry (after 8 hours) the fabric is safe for use but cannot be professional cleaned or laundered until the 96 hour cure period is over.

Nope! We mean it when we say IntegraTect is permanent. Once our product is cured 4 days post treatment, it cannot be removed without physically removing the fabric’s fiber. A professional cleaner may tell you differently because this is not the case for ordinary fabric protection products that they are used to working with.

Currently, our product is not available for purchase by the gallon. We have chosen to make it exclusively available through our service.

Nope! IntegraTect is unique in the way it protects. Our product is a “penetrating” formula which sets us far apart from the competition. Most fabric protection products are what we refer to as “coatings” that will seal over the top of pre-existing stains. IntegraTect has the ability to get beneath pre-existing stains, aiding in their release. We do not guarantee that pre-existing stains will release but we have a ton of luck doing so. Remember, you cannot have your fabrics professionally cleaned until after the 4 day cure time.

IntegraTect is not a fabric, it is a performance fabric solution. We transform any fabric into a performance fabric by applying our proprietary solution.

Yes! IntegraTect will enhance the performance fabric’s ability to resist permanent staining. It will also increase the life of which the fabric is capable of releasing stains.